2015/3/9V1.1+V1.1
37
8.7. Wi-fi setting
Switch to on position, the system will detect available wi-fi connection. db means the signal
strength, the smaller the better (it is advised to be lower than 50db). Please choose the wi-fi
connection, enter password, press connect or Done, wait for connection. Once
“connected”
(red color)shows up, the connection is completed.
※
The electronic meter will memorize the wi-fi device which was connected before. In
next use, the automatic connection will be available provided that this wi-fi device is
located within 20 m so that it is not required to input the password. When there are two
or more wi-fi devices that are connected before in current environment, the last used
device will enjoy the preference.
※
If the fireproof wall of the wi-fi setting is opened, please close it, or the wi-fi setting
cannot be detected or the connection cannot be done. If there is any other problem,
please contact with the saler.
8.8. Power setting
PauseBack: Preset is 15 seconds, and the setting range is 10~30 seconds.
This time means that at the condition of
“pause” during exercise, after certain
period of time without operation, the workout will be ended automatically and turn
to the standby mode.
8.9. Update for the software
APP UPDATE
：
Update for the APP software, please refer to the file about the
update for software for details.
Kernel UPDATE
：
Update for Android core firmware, please refer to the file about
the update for software for details.
MCU UPDATE
：
Update for I/O program
，
please refer to the file about the update
for software for details.
