2015/2/2 V1.1+V1.1
5
STEP 3 ASSEMBLE CONTROL TUBE AND COMPUTER
Connecting the wires of computer(C) and control tube(B) and tighten with truss cross
screw(K06) as figure showing, when assemble, please confirm that it has be locked to
avoid the computer releasing and damaging.
Caution:
When assemble handle bar and computer, maybe need you sit down and confirm
if there is iron tube upon you to avoid the hurt that hitting on the tube.
When assemble, please aim at the hole and confirm the way of computer.
The wires matched with computer must match with computer's hole to avoid
breaking the wire and cause short circuit.
When assemble, it need two or more than two people at least. One holds the
computer and the other connects the wires and tighten it.
: Hand grip instant key connecting wire upper
: Hand grip instant key connecting wire upper
: Hand grip pulse wire upper
: Control wire upper
: Hand grip pulse wire upper
: Networking connecting wire upper
: TV cable
