5.2.
In the standby mode, press key to enter time countdown mode, will
show "30:00" and flicker, press
to set up time(5:00-99:00).
5.3.
In the time countdown mode, press to enter distance countdown mode,
will show "1.00" and flicker, press to set up distance
(0.50-99.9).
5.4.
In the distance countdown mode, press to enter calorie counting mode,
will show "50.0" and flicker, press to set up calories (10.0-999.0).
5.5.
After setting one of the three types of countdown mode, press key, the
treadmill runs after 3 seconds, press to adjust speed and
incline; press key, the treadmill will stop.
Each program is divided into 20 sections; the operation time will be evenly
distributed to each program section. Here below is an 18section program
running diagram.
There are 18 preset programs in this system,P01-P18. In the standby mode,
press key, the window will show “P01-P18”. After choosing the program,
will flicker; display preset time 30:00,press to set up time,
then press to start the built-in programs. The built-in program has 20
segments, the time of each segment equals to setting time/20. When enter to next
segment, the system will have "bi-bi-bi -" 3 sound cues, the speed and incline will
change according to the program segment.
Meantime, you can press to change the speed and incline, but when
enters the next program, it will return to its speed and incline. After running a
program, the system will have "bi-bi-bi -" 3 sound cues, the treadmill stops running
smoothly and shows "End" and enter standby mode for 5 seconds after total stop.
EXERCISE MONITOR INSTRUCTIONS FOR EVOT4S
ENGLISH
6. PRESET PROGRAM:
M
M
P
M
7. PROGRAM INSTRUCTIONS:
Summary of Contents for EVOT4S
Page 1: ...ENG ESP FRA EXERCISE MONITOR INSTRUCTIONS FOR...
Page 2: ...ENGLISH...
Page 9: ...ESPA OL...
Page 17: ...FRAN AIS...