8
ADJUSTMENTS GUIDE
CAUTION!
Moving parts, such as the seat, can crush and cut. Keep hands clear of the sliding rail
during use!
ADJUSTING THE RESISTANCE
Rotate the
Tension Control Knob (No. 11)
clockwise
to
increase the level of resistance. Rotate the
Tension Control
Knob (No. 11)
counter-clockwise
to decrease the level of
resistance.
Tension levels are set at Level 1 being the lowest and Level
8 being the highest.
ADJUSTING THE BALANCE
If you notice that the rower is unbalanced during use, you
should adjust the foot levelers located beneath the rear
support. Rotate
Foot Levelers (No. 23)
clockwise
until it sits
level with the surface that the rower is on. When you have
finished adjusting the foot leveler, re-tighten the
Foot
Levelers (No. 23)
by rotating it
counter-clockwise
. If
required, repeat this process to adjust the remaining feet.
PEDAL STRAP ADJUSTMENT
The pedal strap is adjustable and can be personalized to fit
the user’s foot size.
PLACING THE ROWER
When not in use, you can save space by placing the rower
upright on the floor with
Foot Leveler (No. 77)
SAFETY NOTE: The
Seat (No. 31)
will glide down when
placing
Sliding Rail (No. 5)
in an upright position.
