14
COMPUTER INSTRUCTIONS
FUNCTIONAL BUTTONS:
MODE:
Push down for selecting functions.
SET:
To Set the consumer movement of time
、
distance
、
calories and hand pulse.
RESET:
For resetting consumer movement of time
、
distance
、
calories and hand pulse.
FUNCTION AND OPERATIONS:
SCAN:
Press “MODE” button until “SCAN” appears, monitor will rotate through all the 6 functions: Time
、
speed
distance
、
calorie
、
odometer and pulse. Each display will be held for 6 seconds.
TIME:
Count the total time from exercise start to end.
Press “MODE” button until “TIME” appears, press “SET” button to set exercise time. When the “set” is zero, the
computer will beep for 10 seconds.
SPEED:
Display current speed.
DISTANCE:
Count the distance from exercise start to end.
Press “MODE” button until “DIST” appears. Press “SET” button to set exercise distance. When the “set” is
zero, the computer will beep for 10 seconds.
CALORIES:
Count the total calories from exercise start to end.
Press “MODE” button unit “CAL” appears. Press “SET” button to set exercise calories. When the “set” is
zero, the computer will beep for 10 seconds.
ODOMETER:
Monitor will display the total accumulated distance.
PULSE:
Press MODE button until “PULSE” appears. Before measuring your pulse rate, please place your palms of
your hands on Both of your contact pads and the monitor will show your current heart beat rate in beats per
minute (BPM) on the LCD after 6~7 seconds.
Remark:
During the process of pulse measurement, because of the contact jamming, the measurement value may be
higher than the virtual pulse rate during the first 2~3 seconds, then will return to normal level. The measurement value
can’t be regarded as the basis of medical treatment.
Press “MODE” button until “PULSE” appears. Press “SET” button to set exercise pulse. The setting values of 40-240
RPM, the consumer computer will beep when heart rate is above the SET value.
NOTE:
1. If the display is faint or shows no figures, please replace the batteries.
2. The monitor will automatically shut off if there is no signal received after 4 minutes.
SPECIFICATIONS:
FUNCTION
AUTO SCAN
Every 6 seconds
TIME
0:00’~99:59’
CURRENT SPEED
0.0~999.9 KM/H
（
MILE/H
）
TRIP DISTANCE
0.00~999.9 KM
（
MILE
）
CALORIES
0.0~999.9 CAL
ODOMETER
0.0 ~ 9999 KM
（
MILE
）
PULSE RATE
40~240 BPM
BATTERY TYPE
2pcs of SIZE –AA or UM –3
OPERATING TEMPERATURE
0°C ~ +40°C
STORAGE TEMPERATURE
-10°C ~ +60°C
14
COMPUTER INSTRUCTIONS
FUNCTIONAL BUTTONS:
MODE:
Push down for selecting functions.
SET:
To Set the consumer movement of time
、
distance
、
calories and hand pulse.
RESET:
For resetting consumer movement of time
、
distance
、
calories and hand pulse.
FUNCTION AND OPERATIONS:
SCAN:
Press “MODE” button until “SCAN” appears, monitor will rotate through all the 6 functions: Time
、
speed
distance
、
calorie
、
odometer and pulse. Each display will be held for 6 seconds.
TIME:
Count the total time from exercise start to end.
Press “MODE” button until “TIME” appears, press “SET” button to set exercise time. When the “set” is zero, the
computer will beep for 10 seconds.
SPEED:
Display current speed.
DISTANCE:
Count the distance from exercise start to end.
Press “MODE” button until “DIST” appears. Press “SET” button to set exercise distance. When the “set” is
zero, the computer will beep for 10 seconds.
CALORIES:
Count the total calories from exercise start to end.
Press “MODE” button unit “CAL” appears. Press “SET” button to set exercise calories. When the “set” is
zero, the computer will beep for 10 seconds.
ODOMETER:
Monitor will display the total accumulated distance.
PULSE:
Press MODE button until “PULSE” appears. Before measuring your pulse rate, please place your palms of
your hands on Both of your contact pads and the monitor will show your current heart beat rate in beats per
minute (BPM) on the LCD after 6~7 seconds.
Remark:
During the process of pulse measurement, because of the contact jamming, the measurement value may be
higher than the virtual pulse rate during the first 2~3 seconds, then will return to normal level. The measurement value
can’t be regarded as the basis of medical treatment.
Press “MODE” button until “PULSE” appears. Press “SET” button to set exercise pulse. The setting values of 40-240
RPM, the consumer computer will beep when heart rate is above the SET value.
NOTE:
1. If the display is faint or shows no figures, please replace the batteries.
2. The monitor will automatically shut off if there is no signal received after 4 minutes.
SPECIFICATIONS:
FUNCTION
AUTO SCAN
Every 6 seconds
TIME
0:00’~99:59’
CURRENT SPEED
0.0~999.9 KM/H
（
MILE/H
）
TRIP DISTANCE
0.00~999.9 KM
（
MILE
）
CALORIES
0.0~999.9 CAL
ODOMETER
0.0 ~ 9999 KM
（
MILE
）
PULSE RATE
40~240 BPM
BATTERY TYPE
2pcs of SIZE –AA or UM –3
OPERATING TEMPERATURE
0°C ~ +40°C
STORAGE TEMPERATURE
-10°C ~ +60°C
COMPUTER INSTRUCTIONS
14
