Assembly Instructions
GB
Step 1
1. Fasten front stabilizer (2) & rear stabilizer (3) to main
frame (1) with 4 carriage bolts (50), 4 washers (51) &
4 cap nuts (55) from the underside of stabilizers.
Step 2
1.
Unscrew 2 bolts (52), 2 bolts (91), 2 nuts (69) & 4
washers (92) from handlebar post (4).
2.
Connect upper computer cable (12) with lower
computer cable (13) securely
3.
Put handlebar post (4) into main frame (1). Fix it
with 2 bolts (52), 2 bolts (91), 2 nuts (69) & 4
washers (92) tightly.
Step 3
GB
GB
1.
Place fixing post (5) to metal parts (under computer
bracket) onto handlebar post (4) and secure with 1
bolt (85) at each side tightly.
2.
Connect upper hand pulse sensor wire (17) with
lower hand pulse sensor wire (18) at both sides.
Hide the connection into fix post (5).
3.
Cover end of fixing post (5) with plastic cover
set (upper and lower) (30) at each side and then
secure with 1 bolt (57) (upside and underside) at
each side firmly.
Step 4
GB
GB
1. Plug upper computer cable (12) to jack at back of
computer (11). Plug lower hand pulse sensor wire (18)
to cable at back of computer (11).
2. Attach computer (11) onto bracket at top of handlebar
post (4) and secure with 4 bolts (58) firmly.
- 4 -
Summary of Contents for EX8
