13
this function to edit the values.
Time setting range: 5~99 minutes，the preset value is 20 minutes, step is 1 minute.
Distance setting range:1~99 kilometers，the preset value is 5 kilometers，step is 1.
Calorie setting range: 40~999 calories，the preset value is 200 calories，step is 1.
1.1.
After the function values are set, press ENTER to confirm and press START to start
performing MANUAL program or after setting, directly press START to start, time counting
down.
1.2.
After press ENTER to confirm the set of TIME, DIST or CAL, if you want to cancel the
function setting and to select other functions, only press STOP to exit.
1.3.When at MANUAL mode, if user has not yet set the value of TIME、DIS、CAL and so on.
Press START key directly, and then, machine will operate directly with the minimum speed
and 0 elevation. You can press
or
key to adjust the range of speed and
elevation during operation.
P2 9 hole LEVEL：preset 1，range 1~10， step1，the distance is based on 3500.
P3 hill climb LEVEL：preset 1，range 1~10，step 1.
time：preset 30min；range 20~99min，step 1 min.
P4 hill run LEVEL：preset 1，range 1~10，step 1.
time：preset 30min，range 20~99min，step 1 min.
P5 interval LEVEL：preset 1，range 1~10，step 1.
time：preset 30min，range 20~99min，step 1 min.
P6 rolling LEVEL：preset 1，range 1~10，step1.
time：preset 30min，range 20~99min，step 1 min.
P7 Weight loss LEVEL：preset 1，range 1~10，step 1.
time：preset 30min，range 20~99min，step 1 min.
P8/P9 Custom time：preset 32min，range 20~99min，step 1 min.
