General
1.2
Introduction
Page 14
BOGE Operating instructions for C 15 series screw compressors
Transport damage
BOGE does not accept any liability for breakage or transport damage. Please
inspect the compressor immediately after delivery and direct damage claims
to the last haulier – even when the packing is not damaged! To safeguard
claims against the haulier we recommend leaving the machine, devices and
packing material in the same condition as they were in when the damage was
detected.
In the event of any other complaints, please inform us within six days after ar-
rival of the delivery.
Data on the type plate
Enter the data of your compressor from the type plate or enclosed data sheet
in the folllowing illustration 1.1.
This will ensure that in the event of enquiries, you will always have the most
important data to hand.
Fig. 1.1: Data on the type plate
Service
Please do not hesitate to contact BOGE service if you have any questions.
Please call:
Telephone: +1-770-874-1570
Telephone: +49 5206 601-140
In the event of inquiries, always specify the following data of your compressor
to prevent any delays:
–
Type
–
Year of manufacture
–
Machine number
WARNING!
Only BOGE service technicians or persons authorized by BOGE in writing
may repair or alter the compressor during the warranty period. Otherwise all
warranty claims will expire!
