DESKTOPS
SPECIALTY
Desktop Paging Microphone
MBS1000A
This dual-impedance desktop microphone provides natural,
highly intelligible sound that is smooth and peak free. With
its sleek and stylish design, the MBS1000A is operated with a
simple push-to-talk bar (lockable) or lift-to-talk operation (de-
featable) for activating the microphone and external equip-
ment. Features 7 feet of four-conductor, 2-shielded cable;
an impedance selector switch; and four molded
non-skid, non-marring “feet”.
(4-3/8" W x 9-3/8" H x 5-7/8" D, 1.25 lb.)
•
Cardioid pickup pattern
•
Dynamic element
•
Rubberized finish
•
Impedance: Hi-Z, 50k ohms; Lo-Z, 500 ohms
•
Wide frequency response range of 45 Hz - 15 kHz
•
Sensitivity: Hi-Z, -52 dB +/- 3 dB;
Lo-Z, -72 dB +/- 3 dB
•
For industrial and commercial, public
address & paging applications
Dynamic Desktop Microphone
DDU250
High-quality slim, compact desktop microphone with gooseneck position-
ing flexibility for sound reinforcement applications. Exudes excellent
speech and intelligibility. Cuts through noisy backgrounds of live miking sit-
uations and large gatherings. Effective control of feedback, reduced am-
bient handling noise, and low sensitivity to breath and
popping sounds. Features a push-to-talk switch, a push-
to-lock switch, a hard-wired 10-foot long 5-conductor
cable, and a wire-mesh wind filter. Table stand with
on/off switch.
(4-1/4" W x 18-1/4" H x 6 -1/4" D, 3-1/2 lb.)
•
16" sturdy, flexible neck
•
Rugged metal die cast base w/shock mount
•
Matte black finish
•
Cardioid pickup pattern
•
External contact closure outputs
•
Moving coil dynamic element
•
500-ohm impedance
•
Wide frequency response range
of 100 Hz - 12 kHz
•
Sensitivity of -76 dB +/- 3 dB
Professional Boundary Microphone
SCU250
Full, rich reproduction of voice and music in a low-profile design.
Perfect for applications where minimum visibility is required,
or where a handheld microphone might be impractical to use.
Low sensitivity to thumping noise, excellent user sound isolation,
feedback rejection, and reduced room reverberation. Excellent
clarity for multiple microphone applications.
(2-3/4" W x 3/4" H x 3-1/4" D, 11 oz.)
•
Heavy-duty metal case with matte black finish
•
Cardioid pickup pattern
•
Electret condenser element
•
Phantom power operated (9-52V DC)
•
250-ohm impedance
•
Frequency response range
of 20 Hz - 18 kHz
•
Sensitivity of -58 dB +/- 3 dB
•
26' quad cable
Professional Overhead Hanging Mic
WCU250
High-quality sound reinforcement from a low-profile, compact,
lightweight hanging microphone. Adjust metal hanger to angle
and position in any direction. Ceiling-mount design allows for
overhead pickup of groups. Accurate and dependable. Clear,
crisp sound with full, rich reproduction of voice and music. Excel-
lent off-axis rejection, no peaks, reduced handling noise sensi-
tivity, high SPL handling capacity, and superior feedback control
with no acoustic or electrical phase anomalies or audio band res-
onance. Low mass diaphragm. Features a high-tensile cable with
mini XLR output plug.
(1-1/4" D x 1/2" dia., 5 oz.)
•
Stainless steel, adjustable black hanger
•
20-foot long cable
•
Matte black finish
•
Cardioid pickup pattern
•
Electret condenser element
•
Phantom power operated (9-52V DC)
•
250-ohm impedance
•
Wide frequency response range of 50 Hz - 18 kHz
•
Sensitivity of -65 dB +/- 3 dB
