44
1
On the appliance Web UI’s main page, select
DSP
.
2
Select the
Menu
button for any channel.
3
From the drop-down menu, select
Router
.
4
Enable the desired Inputs (green).
5
Enable the desired Outputs (blue).
6
Enable the output channels to which each input is to be routed (gray).
7
Adjust the input, output, and routed channel gains (green, blue, and gray).
Settings
You can specify custom names and colors for each of the mixing board channels. Note
that if your appliance is configured for single channel bridge mode, only one channel
appears.