If two channel mode is used, then Channel A is connected to the
A+ and A- terminals and B channel is connected to B+ and B-
terminals. (See Figure 2.)
Figure 2. Two-Channel Wiring
Notice
The minimum impedance of a Bridged 70V/25V/8Ω High
Impedance system should not be less than 8Ω.
The minimum impedance of a 2CH 25V/8/4Ω system
should not be less than 4Ω per channel.
The combined total power of each speaker tap must not
exceed 80 % of the rated amplifier power in either Bridged
70V/25V/8Ω mode or 2CH 25V/8/4Ω mode.
1200 MacArthur Blvd. Suite 304, Mahwah, NJ 07430
1-800-999-2809
© Copyright 2018, Bogen Communications, Inc.
7
