1200 MacArthur Blvd. Suite 304, Mahwah, NJ 07430 • 1-800-999-2809
© Copyright 2018, Bogen Communications, Inc.
Installation
To install the Nyquist Matrix Mixer Pre-Amp:
1. Either place the Matrix Mixer Pre-Amp on a shelf, or use the adjustable brackets to mount it on a
wall or in a rack.
2. Ensure the POWER switch is in the OFF position.
3. Attach and then plug in the AC line cord.
4. Connect the 10/100 network cable.
5. Toggle the POWER switch ON.
6. Connect the input devices to the XLR, screw-terminal connections, or both as needed.