1200 MacArthur Blvd. Suite 304, Mahwah, NJ 07430 • 1-800-999-2809
© Copyright 2018, Bogen Communications, Inc.
Viewing and Understanding LEDs
Two LEDs appear on the front of the
Matrix Mixer
Pre-Amp
. One is labeled POWER and appears
as solid red during initial power up, flashes green
during a boot sequence, and appears solid green
when fully booted.
The STATUS LED uses the following indicators to
provide information about the appliance:
• Flashing red – No network connection found.
• Solid blue – The
Matrix Mixer Pre-Amp
is in
an uninitialized state and is not associated to
a server. (The server may be in a discovery mode.)
• Solid green – The
Matrix Mixer Pre-Amp
is registered to a Nyquist server and is in normal operation.
• Flashing green – The
Matrix Mixer Pre-Amp
has an IP address but is not registered with the Nyquist
server.
• Solid red – The
Matrix Mixer Pre-Amp
needs to be rebooted or reset so that the Nyquist application can
resume.
• Flashing Blue – The
Matrix Mixer Pre-Amp
is updating.
Using the Reset Button
The Reset button allows you to restart the Matrix Mixer Pre-Amp or to reset
the appliance’s configuration settings to the factory default settings. For
more information about resetting configuration settings, refer to the
Nyquist Matrix Mixer Pre-Amp Configuration Manual.
