4
Limitations:
The EXTENTION SCREW COLLARS (ESC) are
designed to work with 6 ton rated jacks that fall within the
minimum and maximum size as shown.
6 ton
Installation:
1. Remove the O-Ring that holds the ESC together.
2. Extend the screw of your jack until the ESC will fit
around the screw and close together.
FIG 1
3. Install the O-Ring back over the ESC so that the
O-ring fits into the groove.
FIG. 2
5. Turn the screw in until it bottoms snuggly
against ESC.
FIG.3
FIG 1
FIG. 2
FIG. 3
