Product Drawing&lndication
OPERATION GUIDANCE
'OFF
-ON
Working Indication Light
(When working,
red
light on)
.Power Indication Light
(When powered, blue light on)
Supervision
Window
Upper Cover
Outer Shell
Stainless
Steel Tank
Circuit Board
Transducer
Power Plug&Cord
l.Open
the upper
cover,
put the
article
into the tank,
then fill
wi th water.
(The water should
merge the article
but not exceed
the ruling mark.)
Running
without
water
can
damage
the unit!
2.Close
the cover.
Connect
the
unit
with power.
The Power
Indication
Light
(Blue)
on the
inner
cover
will be on .
3.Press
ON
to start
cleaning
and the Working
Indication
Light
(Red)
on the upper
cover
will be on.
During cleaning, the"ZiZi"
noise is normal, which
comes from tank working.
4.After
3 minutes,
the cleaning
automatically
stops
and the
Red light
turns
off. Or press
OFF
to stop.For
another
cleaning
cycle,
just
repeat
above
process.
5.When
cleaning
is over,
cut off
the power.
Open
the cover,
take
the cleaned
article
out
and drain
the water.