Boldan Oy, Matkuntie 3, FIN-05200 Rajamäki | www.boldan.
fi
| +358 (0)9 853 1042
Miniroller D200 e
Manual
6
3.3.2 ROLLER ADJUSTMENT AND CHANGE OF DIRECTION
• The height of upper roller can be adjusted with the wheel of linear axle.
• Before changing directions the rollers must be completely stopped. The electrical components might
get damaged due to large strain, If not stopped before changing rolling direction.
!
3.4 WARNINGS
Miniroller can be used on
fl
at and
fi
rm surfaces only!
Do not touch the rotating rollers!
Person operating Miniroller must always wear rubber gloves to protect against epoxy (for example
nitrile gloves) and must wear protective eye glasses.
Workwear must be suitable to avoid sleeve or another part of clothing getting caught between the
rollers.
• Miniroller can only be used by person familiar with it.
• Miniroller must be disconnected from electricity for cleaning and maintenance.
• Liner must be installed between rollers before turning them on.
• Beware of rotating rollers.
• Beware of clothing getting caught between rotating rollers.
• It is recommended to use the foot pedal.
