2
UK
Safety Tips
Electrical requirements:
This appliance should only be connected to the mains
electricity supply by a qualified electrician. Hardwire
the appliance into a suitable power supply with correct
voltage and sufficient power capacity. Refer to the
product label on the appliance for voltage and wattage
requirements.
Under no circumstances put a plug on the cable.
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
•
Caution!
Some parts of this appliance can become
very hot and cause burns. Particular attention has to
be given where children and vulnerable people are present.
• Keep combustible materials, such as clothes, curtains and
other furnishings, away from the appliance.
• Do not touch the fireguard or reflecting cover when in use.
• Do not use in any area where there is a presence of gases,
explosives or flammable objects.
• Do not allow the power cord to hang over a countertop or
come into contact with any hot surface.
• Do not locate the appliance immediately below a socket-outlet
or under dripping clothes.
FS398_UK_A5_v1_20210611.indb 2
FS398_UK_A5_v1_20210611.indb 2
2021/6/11 09:57
2021/6/11 09:57
