5
UK
01
Hex screw
M6*30mm
x3
05
Screw
M5*10mm
x2
02
Flat gasket
Φ25*Φ6.5*2.0mm
x6
06
Pressure strip
PA66
x2
03
Spring washer
Φ6*T1.0mm
x3
07
Screw
PW4*20mm
x4
04
Base pad
M8*15
x5
08
Expansion
screw
M6*85mm
x3
Step 1: Connect the 3 poles together.
Step 3: Attach the connector end from the heater head
to the other end with cables. Then thread the cables
through the poles and base.
Step 2: Fix the pole onto the base.
04
02
03
01
Step 4: Mount
the heater head
onto the upper
pole.
05
Step 5: Fix the
power cable into
the groove in
the base bottom
using the
pressure strips
and screws.
07
06
FS398_UK_A5_v1_20210611.indb 5
FS398_UK_A5_v1_20210611.indb 5
2021/6/11 09:57
2021/6/11 09:57
