6
UK
Step 6: Drill holes on the floor. Then stand the heater upright and fix it on the floor.
Important: Ensure that the supply cables are well
arranged and do not come into contact with reflector of
the heater or trail into heated area.
Floor
08
Operation
Turn the heater on and select the desired Power level using the ON/OFF switch.
O
position
Heater on/off
I
position
Power level 1: Heater on with 50% power
II
position
Power level 2: Heater on with 100% power
Note: Featured with the tip-over protection, the heater will automatically turn off in the
event of a tip-over angle more than 45°.
Cleaning, Care & Maintenance
• Proper maintenance plays an important part in the life span and functioning of the
heater.
• Turn off and disconnect the heater from power source before cleaning and maintenance.
Ensure the surface is cool.
• Clean the external surface using a damp cloth. If necessary, clean with a damp sponge and mild
detergent. Always wipe dry after cleaning.
• DO NOT allow any moisture to enter the interior via any air inlet/outlet.
• DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes for cleaning. This
may cause damage or deterioration to the surface of the heater.
• The appliance contains no user serviceable parts. A BOLERO dealer or qualified technician should
carry out repairs if required.
•
Storage:
Store in a cool, dry location when not in use to prevent dust and dirt build up.
Troubleshooting
Fault
Probable Cause
Solution
Appliance not
working
The unit is not switched on
Check the unit is hardwired correctly and
switched on
Lead is damaged
Call BOLERO agent or qualified Technician
Power supply
Check power supply
Lamp expired
Call BOLERO agent or qualified Technician
FS398_UK_A5_v1_20210611.indb 6
FS398_UK_A5_v1_20210611.indb 6
2021/6/11 09:57
2021/6/11 09:57
