User Manual
14
Chapter 4: DVR Boot up
4.1 System Initialization
Picture 4-1
4.2 Live Interface
area outside the menu allows you exit the Pop-up menu.
Note:
When internal HDD is not connected or an error occurs, the character “H” will appear on the first channel
of the live screen and accompany buzzer alarm. If you want to close the buzzer alarm, please enter into [Main
menu
Advanced
Events] to set HDD loss, HDD space not enough and alarm output to “off”
Chapter 5: DVR Menu
5.1 Pop-up Menu
After finishing system initialization, click
right key of mouse on main interface mode to
enter into Pop-up Menu. Now you could
perform
parameter setting and operate on Main Menu,
Multi-Pics, PTZ, PIP, Rec. Search, Mute, Manual
record, Start Rolling and Start Cruise etc..
Clicking [0] key on the remote controller or
holding press [REW] key on the 4ch/8ch front panel
and [0] key on 16ch front panel could switch system
to other output device.
After finishing initialization the system will enter
into
<Live> screen. Picture 4-2 is the 16-split display
defaulted by system, which is showing no video input status.
Once there are video inputs, the screen will display live
images from the cameras. In Live mode, if you use the
mouse to double-click the live image of any channel, the
image will be maximized to full screen, by double-clicking
again, image will come back to 16-split display mode; clicking
the right button of the mouse will enter into Pop-up Menu;
clicking the left button of the mouse allows you select menu
items; and clicking any
After connecting the Power cable of DVR
to wall outlet and pressing the Power button on
the front panel, you will enter into the system
initializing screen shown as Picture 4-
1
Picture 5-1
Picture 4-2
Summary of Contents for SVR9004CHD
Page 1: ......
Page 63: ...User Manual 58 8 5 System Connection Diagram 4CH 8CH ...
