Bolin Technology BC-9 Series User Manual Download

Page: 40 / 57

enable exposure compensation. When you set EX-COMP to ON, LEVEL appear and you can select the
exposure compensation level from the following:
–10.5, –9, –7.5, –6, –4.5, –3, –1.5, 0, +1.5, +3, +4.5, +6, +7.5, +9, +10.5
If you set the level to 0, exposure compensation will be disabled. Level +10.5 is the brightest and

–10.5 is the

darkest compensation value.
When EX-COMP is set to OFF, exposure compensation does not function.

WHITE BALANCE Menu

The WHITE BALANCE menu is used to select the white balance mode.

MODE (white balance mode)

Select the white balance mode from the following:

AUTO:

This mode computes the white balance

value output using color information from the
entire screen. It outputs the proper value using
the color temperature radiating from a black
subject based on a range of values from 2500K
to 7500K. This mode is the initial setting.

SPEED (white balance speed)

: You can adjust

the speed at which the camera reaches the
white convergence point when AUTO1 or
AUTO2 is chosen. Choose a value from 1, 2, 3, 4, and 5. 5 is
the fastest and 1 is the slowest.

OFFSET:

The white convergence point can be shifted when

WHITE BALANCE mode is AUTO1, AUTO2, or ONE PUSH.
The range is from

–7 to 0 to +7. White balance is shifted toward

blue when a negative value is chosen, and it is shifted toward
red when a positive value is chosen.

INDOOR:

3200K Base Mode

OUTDOOR:

5800K Base Mode

MATRIX (Color Matrix)

You can emphasize or weaken a specific color region while keeping the white convergence point
unchanged. When you turn this ON, the following items are displayed for adjustment.

SELECT:

You can choose an internal preset

matrix for matrix calculation. You can choose
from STD, HIGH SAT, FL LIGHT, MOVIE,
STILL, CINEMA, PRO, ITU709, and B/W. This
becomes disabled when MATRIX is turned
OFF.

LEVEL (color level)

: You can adjust the color

density of the picture. Choose a value in the
range from 0 to 14. The greater the number, the
denser the colors, and vice versa. This
becomes disabled when MATRIX is turned
OFF.

PHASE:

You can adjust the color tone of the

entire picture. Choose a value from

–7 to 0 to +7.

This becomes disabled when MATRIX is turned OFF.

R-G, R-B, G-R, G-B, B-R, B-G:

You can set a coefficient for each combination of RGB individually, to

adjust the hue of the entire picture. Choose a value from

–99 to 0 to +99. This becomes disabled when

MATRIX is turned OFF.

OPW (One Push White Balance):

The One Push White Balance mode is a fixed white balance mode

that may be automatically readjusted only at the request of the user (One Push Trigger), assuming that
a white subject, in correct lighting conditions, and occupying more than 1/2 of the image, is submitted to
the camera. One Push White Balance data is lost when the power is turned off. If the power is turned
off, reset One Push White Balance.

EXPOSURE
>WHITE BALANCE

DETAIL

PICTURE

GAMMA
NETWORK

PAN TILT ZOOM

SYSTEM

OSD

WB MODE

AUTO

SPEED

OFFSET

MATRIX