6. Line up the mounting holes in JL hood
lock with existing holes on the vehicle
frame - Using the rivet gun install the 4
rivets in place - start with the 2 front holes
as shown.
9. Position the grille back into place using 6 new
push pins provided.
10. Close and latch hood shut, insert key, turn to the left to lock the
hood, and remove your key.
Instructions for Installation
4. Open hood; using a flat head
screwdriver, remove the 6 plastic
push pins from the top of the grille.
5. Pull grille forward and downward
to unhinge the snaps along the
bottom.
7. Lay the grille down on a protected surface (cardboard)
with the interior facing up. Using a phillips screw driver,
remove the 4 screws and 2 plastic clips, and remove the
middle section of the grille.
8. Position the new grille insert in place and secure using the
same 4 screws and 2 plastic clips.
1
st
Rivet
3
rd and
4
th(no preference)
2
nd
Rivet
4737932AA
