background image

Bolton Conductive Systems 1164 Ladd Rd, Walled Lake, MI 48390 (248) 669-7080 

http://www.boltonconductivesystems.com

 

  

1.15)  If more than one button is pressed simultaneously, the remote control will 
automatically go back into “sleep” mode and requires the UNLOCK button to be pressed 
(refer to section 1.11) to be re-activated; This helps prevent un-intentional operation 
functions from taking place in a scenario where the buttons are pressed in the users 
pocket, etc.

 

 
 

1.2)  Message encryption/security 

 

1.21)  The remote kit utilizes a rolling code security system to insure a unique transmitter 
and receiver communication link. This prevents other wireless systems from 
unintentionally communicating with the receiver. 

 

1.3)  Range requirement 

 

1.31)  In an open area (without obstructions or reflecting objects), the radio range shall be 
at least 100 feet. It is recommended that the receiver be mounted in the position shown in 
figure 2 for optimal wireless range and performance.  

 

1.4)  Environmental operating conditions and requirements 

 

1.41)  The remote control shall maintain all functional and range requirements when 
operated in ambient temperatures between 0ºF and 130ºF. 

 

1.4

2)  The receiver is considered “water resistant” and will protect against small amounts 

of rain for a short period of time, but it is not “water proof”. The remote is not intended for 
prolonged use in wet environments such as rain. As such, the receiver will not withstand 
any under water submersion.   

 

1.5)  Vibration/shock/drop 

 

1.51)  The transmitter and receiver are designed to withstand a drop from 3 feet onto 
most surfaces without affecting the functionality or performance. Prolonged abuse or 
excessive drops could result in permanent damage. 

 
1.6)  Electrical characteristics 

 

1.61)  Receiver operating voltage and current 

 

 

Voltage range 10 - 14 volts 

 

12 volts nominal 

 
 

 

1.63)  Receiver standby current 

 

 

3 mA max standby current 

 

1.64)  Transmitter battery  
 

 

Transmitter uses 2 - CR2016 3 volt lithium coin cell batteries 

 

Battery life- brand new batteries last approximately two years depending on how 
often the remote is used and the manufacturer of the batteries. 

 

 
 
 

Reviews: