SG2060 series 3 Item Settings
Page 10
Set Clock
device by setting this parameter
when necessary, e.g., after every
battery change. The date format is
year/month/day, the time format is
hour: minute: second. The valid
value for year is between 2016 and
2050.
Time Lapse
Time lapse means the camera can
capture images or videos at a preset
time interval regardless of whether
motions are detected. The default
parameter is Off, which means the
timer function is disabled. Changing
this parameter to a non-zero value
turns on the Time Lapse mode, and
camera will take photos at given
time interval.
Please note that if PIR Trigger is set
to Off, then Time Lapse can’t be set
to Off
.
PIR Trigger
Choose sensitivity of the PIR sensor.
This parameter defines the
sensitivity of the PIR: High, Normal,
Low and Off. The default value is
“Normal”. The higher sensitivity
indicates that the camera is more
easily to be triggered by motion,
taking more pictures or recording
more videos. It is recommended to
use high sensitivity in room or
environment with little interference,
