6DIHW\UHJXODWLRQV
%20$*
15
BPR 25/32 - BPR 25/40
●
step or stand under loads being lifted,
●
the machine must not swing about when being
lifted.
Secure the machine on the transport vehicle
against rolling off, slipping and turning over.
Starting the machine
Before starting
Familiarize yourself with the equipment, the con-
trol elements and the working principle of the ma-
chine and your working area.
Use your personal protective outfit (hard hat, safe-
ty boots etc.).
●
Wear ear defenders.
Before starting the machine check whether:
●
the machine shows any obvious faults
●
all guards and safety elements are in place
●
the control elements are fully functional
●
the machine is free of oily and combustible
material
●
all handles are free of grease, oils, fuel, dirt,
snow and ice.
●
Always wear ear defenders when working with
the vibratory plate.
Use only machines which are serviced at regular
intervals.
For emergency starting take a correct position to
the engine and hold the crank handle correctly.
Do not use any starting aids like start pilot or ether.
Starting in closed rooms
Exhaust gases are highly dangerous! Always en-
sure an adequate supply of fresh air when starting
in closed rooms!
Operation
The machine must only be operated with the steer-
ing rod folded down.
Guide the machine so that you to not hit your
hands against any hard obstacles. Danger of inju-
ry!
Stop the machine if you notice unusual noises and
the development of smoke, detect the cause and
have the fault corrected.
Operate the machine only at full engine speed, as
otherwise the centrifugal clutch will be damaged.
Never let the machine run unattented.
Parking the machine
Park the machine on level and firm ground.
Before leaving the machine:
●
Park the machine so that it cannot tip over,
●
shut the engine down and turn the ignition
switch to "OFF"-position.
Mark machines, which could be in the way, with a
clearly visible sign.
Filling the fuel tank
Refuel only with the engine stopped.
Do not refuel in closed rooms.
No open fire, do not smoke.
Do not spill any fuel. Catch running out fuel, do not
let it seep into the ground.
Do not inhale any fuel fumes.
Maintenance work
Maintenance work must only be performed by
qualified and authorized persons.
Keep unauthorized persons away from the ma-
chine.
Do not perform maintenance work on a running
engine.
Park the machine on level and firm ground.
Working on the engine
Drain the engine oil at operating temperature -
danger of scalding!
Wipe off spilled oil, catch running out oil and dis-
pose of environmentally.
Store used filters and other oil contaminated ma-
terials in a separate, specially marked container
and dispose of environmentally.
Working on the fuel system
No open fire, do not smoke, do not spill any fuel.
Catch running out fuel, do not let it seep into the
ground and dispose of environmentally.
Go
to
Discount-Equipment.com
to
order
your
parts
