2SHUDWLRQ
%20$*
20
BPR 25/32 - BPR 25/40
Fig. 8
●
Open fuel cock 1 (Fig. 8) completely by turning
in direction of arrow.
●
Close the choke completely by shifting lever
(2) in direction of arrow.
L
Note
With warm engine or high ambient temperature do
NOT operate chike lever (2).
Also operation position.
Fig. 9
●
Turn ignition switch 1 (Fig. 9) to position "ON".
Caution
The engine is equipped with a low oil level
safety feature. The engine cannot be started if
the oil level is too low.
Danger
Danger of burning!
Use safety gloves when the engine is hot.
Fig. 10
●
Stand in a correct position to the machine.
●
Slightly pull the starter handle (Fig. 10), until
resistance can be felt (compression pressure),
then pull with power, but do not pull the cord
out completely.
●
Guide the starter rope back by hand.
L
Note
Do not let the starter handle hit back against the
engine.
●
If the engine does not start during the first at-
tempt, repeat the starting process.
Fig. 11
●
If the engine stops again under cold weather
conditions after approx. 3 to 5 seconds, close
the choke again with lever 2 (Fig. 11) and re-
peat the starting process.
Go
to
Discount-Equipment.com
to
order
your
parts
