2SHUDWLRQ
%20$*
21
BPR 25/32 - BPR 25/40
Fig. 12
●
Slowly close the choke with lever 2 (Fig. 12)
while the engine is warming up.
Fig. 13
●
Shift the throttle lever (Fig. 13) to idle speed
position "MIN".
L
Note
Run the engine warm for a short while before start-
ing work.
Operation of the vibratory plate can be started as
soon as the engine responds to short throttle com-
mands.
3.5
Work/operation
Caution
Operate the vibratory plate only with full en-
gine speed, as otherwise the centrifugal clutch
may burn.
Fig. 14
●
Shift the throttle lever (Fig. 14) to position
"MAX" (full speed).
L
Note
For short breaks you should always return the
throttle lever to idle speed position, this avoids pre-
mature wear of the centrifugal clutch.
Fig. 15
●
Actuate travel lever 1 (Fig. 15) to forward ’I’ or
reverse ’II’, according to the required travel
speed.
Go
to
Discount-Equipment.com
to
order
your
parts
