0DLQWHQDQFHHYHU\PRQWKV
%20$*
37
BPR 25/32 - BPR 25/40
4.14 Cleaning the fuel sludge fil-
ter
Danger
Fire hazard!
Gasoline is easily inflammable, do not spill any
gasoline.
When working on the fuel system do not use
open fire, do not smoke.
Fig. 37
●
Close the fuel cock, unscrew fuel sludge filter
1 (Fig. 37) and wash it out with gasoline.
●
Check the O-ring for damage, if necessary use
a new one.
●
Turn the fuel sludge filter in tightly and mind
the O-ring (2).
4.15 Checking, tensioning,
changing the V-belt
Checking the V-belt
Fig. 38
●
Remove the V-belt guard.
●
Check condition and tension of V-belt (Fig.
38).
●
Compression measurement approx. 5 mm.
●
Change a damaged V-belt.
Tensioning the V-belt
Fig. 39
●
Loosen the fastening screws 2 (Fig. 39) on the
V-belt side first.
●
Pull the engine carrier plate (1) up and tighten
the fastening screws.
●
Loosen the fastening screws on the starter
side.
Go
to
Discount-Equipment.com
to
order
your
parts
