BOMANN 660103, Instruction Manual

KB6011CBN_IM_01.2022 

13.01.22

29

Unpacking the Appliance

1.  Remove the appliance from the package.

2. 

Remove all packaging material such as films, filler, cable 

holders and cardboard.

3.  Check the delivery contents for completeness.

4.  Should the package contents be incomplete or damages 

be found, do not take the appliance into operation. Take 

it immediately back to the dealer.

  NOTE:

Dust or production residues can be located on the appli-

ance. We recommend to clean the appliance as described 

under “Cleaning”.

Scope of Delivery

1  Cooler box

1  Power cord for alternating current (AC) 220  – 240 Volt

1  Car power cord for direct current (DC) 12 Volt

Notes for Use

General Notes

• 

Never place the appliance next to naked flames or other 

heat sources. 

•  For best results, only store already cooled food / bever-

ages in the cooler. Select a place of use that is protected 

from direct sunlight. 

•  The lid is locked when the handle is pushed back and 

when carrying.

•  To open the cooler box, pull the handle forward.

•  Do not open the lid more often than required. Do not 

leave the lid open more often than it is necessary. This 

affects the cooling performance.

•  The cooling duration depends on the ambient temper-

ature.

•  The appliance is not suitable for permanent operation. 

•  The appliance can be connected to two different energy 

sources.
-  Alternating  current:  220  – 240 V~  or

-  Direct current: 12 V 

•  Use the switch to select an operating mode.

Operating Modes

  NOTE:

To use the 

ECO

 or 

MIN

 functions, the appliance must be 

connected to 220  – 240 V alternating current. 

•  In the 

MAX

 operating mode, cooling is at the highest 

level. Use this operating mode if you want to cool the 

food.

•  The output is reduced in the operating mode 

ECO

. Use 

this mode if you want to cool for a longer period of time.

•  In the 

MIN

 operating mode, cooling is performed at the 

lowest level. Use this operating mode for food that has 

already been precooled.

Using the Appliance

The switch for the operating mode, the AC connection 

socket and the DC cable can be found at the backside of 

the appliance.

Connection to the Alternating Current

1.  Check to make sure that the mains voltage that you 

want to use is 220  – 240 V~.

2.  Plug the power cord for alternating current into the 

AC

socket on the appliance.

3.  Connect the appliance to a properly installed earthed 

socket.

4.  Set the switch to 

MAX, MIN

 or 

ECO

.

Connection to the Direct Current

1.  Remove the power cord for the alternating current, if 

necessary.

2.  Turn on the engine of the motor vehicle.

3.  Remove the DC cable from the cable storage compart-

ment at the backside of the appliance.

  CAUTION:

The cable is firmly connected to the appliance. You 

won’t be able to remove it.

4.  Connect the appliance to the cigarette lighter in the 

motor vehicle. 

5.  Set the switch to 

MAX

.

  NOTE:

Protect the battery of your motor vehicle. Only run the 

appliance in the motor vehicle while the engine is running.

End of Operation

There is no automatic shut-off. The appliance runs perma-

nently as long as it is connected to a power source.
1.  Unplug the power cord from the socket or the cigarette 

lighter.

2.  If you have operated the appliance with alternating cur-

rent, unplug the connection cable from the appliance.