22
WARNING:
•
Do not modify the appliance plug. If the plug does
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.
•
The accessibility of the power plug must be en-
sured to disconnect the appliance from the power
supply in case of emergency.
•
Make sure that the voltage supply matches the
specifications on the rating label before connect-
ing.
•
Connect the mains cable to a properly installed
and earthed wall outlet.
•
If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Reversing the door opening
If required, the door openings can be moved from the
right (supplied condition) to the left side.
WARNING:
When replacing the door stops, the appliance must
be disconnected from the power supply first.
NOTE:
•
Ask another person to assist.
•
You possibly need:
screw wrench, Phillips screw-
driver as well as a thin-blade screwdriver.
•
*Delivery scope!
Keep the parts to be replaced for another possible
door stop change.
•
Remove the hinge cover and dismount the upper
door hinge.
•
Lift out the fridge door; move the door stopper on
the door underside. Set the door safely aside.
•
Dismount the middle door hinge. Lift out the
freezer door; move the door stopper on the door
underside. Set the door safely aside.
•
Tilt the appliance slightly backwards and block it
in this position. Unscrew the feet and dismount
the lower door hinge.
Summary of Contents for 732021
Page 30: ...30...
Page 31: ...31...
Page 32: ...32 C Bomann GmbH www bomann germany de Made in P R C Stand 10 2022...
