22
•
Ensure that your mains power corresponds with the specifications of the appliance. The specifications are
printed on the rating label.
•
Connect the mains cable to a properly installed and earthed wall outlet.
Reverse the Door Opening
Reverse the Door Opening
Reverse the Door Opening
Reverse the Door Opening
If required, the door opening can be moved from the right (supplied condition) to the left side.
WARNING:
WARNING:
WARNING:
WARNING:
When replacing the door stop, the appliance must be disconnected from the power supply. Always unplug the
appliance first.
NOTE
NOTE
NOTE
NOTE::::
•
When installing, ask another person to assist.
•
You need:
screw wrench, Phillips screwdriver as well as a thin-blade screwdriver.
•
Remove the screw covers at the appliance cover. Un-
screw the below screws and remove the appliance cov-
er
•
Transfer the blind cap of the appliance cover at the
opposite side.
•
Dismount the upper door hinge by loosening the screws.
Open the appliance door a little and take it carefully of
the lower door hinge.
•
Remove the blind cap (B) of the appliance door. Insert
the blind cap (A) contained in the delivery scope.
NOTE
NOTE
NOTE
NOTE:::: Keep the blind cap (B) for a further possible door opening reverse.
•
Tilt the appliance slightly backwards and block it in this
position. Unscrew the feet. Dismount the foot bracket
and the lower door hinge by loosening the screws.
•
Attach the lower door hinge at the respective opposite
appliance side, after you have unscrewed the hinge pin
and used by the other hinge side. Transfer also the foot
bracket to the respective opposite side. Turn in the feet
accordingly.
•
Replace the appliance upright again. Insert the appliance door on the lower hinge pin and fix the door to
the property position.
