19
2.
Install the power cord so that the
appliance can be easily connected
after installation. Slide the appliance
into the built-in opening until the stop plate (A) abuts
the furniture.
3. The sides of the mount-
ing guide must rest flush
at the built-in furniture.
A distance of 5 mm must be located on the side
without mounting guide between appliance and built-
in furniture. Arrange the appliance for a vertical posi-
tion by the adjustable feet (a). To fix the unit, screw
in the
supplied screws
through the foot brackets.
4. Attach the
supplied ventilation
grid
between the feet.
5. Press the rubber seal between the
appliance and built-in furniture firmly
(on the side without hinge).
6. Separate the parts B, C and D of
part A.
7. In consideration of the shown dis-
tances, hold the guide (A) at the top
and bottom inside of the furniture door;
mark the positions of the drill holes. After drilling, fix
the guide with the screws provided.
8. Insert the cover (C) until it clicks in
the guide (A).
9.
Fully open the appliance and furni-
ture door and join them together. Slide
the bracket (B) in the guide (A) and
mark the drill holes. Remove the bracket and drill
holes with about Ø 2 to 4.5 mm from the outer door
edge. Put the bracket on again; secure it with the
screws provided.
10.
If an aligning of the furniture door is
necessary, use the slot spacing. Check if
the door is arranged vertical as well
as horizontal, so that a smooth opening and closing
of the door is ensured.
11. Insert the cover (D) until it clicks on
the angle (B).
Startup / Operation
Startup / Operation
Startup / Operation
Startup / Operation
Prior to first use
Prior to first use
Prior to first use
Prior to first use
CAUTION
CAUTION
CAUTION
CAUTION::::
After transport, the appliance should be left standing
upright for about 4 hours before connecting to the
power supply. Nonobservance could lead to malfunc-
tion of the cooling system and causes an appliance
breakdown.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter “Cleaning and Maintenance”.
Star
Star
Star
Starting the appliance
ting the appliance
ting the appliance
ting the appliance
•
Connect the appliance to the power supply.
•
Operate the temperature control. See also the
following section "Settings".
Settings
Settings
Settings
Settings
NOTE
NOTE
NOTE
NOTE::::
Due to external influences such as ambient tempera-
ture, frequency of door opening and appliance as-
sembly, the temperature can be affected.
Setting [ • ]
means that the appliance is in the off
state. Turn the temperature control clockwise, start-
ing from this setting; the appliance will turn on auto-
matically.
The power levels [1 – 4]
regulates the different val-
ues of the internal temperature.
