27
•
(6) Move the blind plug and the hinge
pin retainer on the top of the door and
(7) the doorstop on the underside of
the door.
•
(8) Move the blind plugs on the
exposed holes of the middle door
hinge.
•
(9) Tilt the unit slightly backwards and
lock it in this position. Unscrew the
feet and disassemble the lower door
hinge.
•
(10) Transfer the lower door hinge to
the opposite device side; after moving
the pin to limit the door opening into
the exposed hole.
•
(11) Fasten the hinge and turn in the
feet.
•
Put the device back in the upright
position. Put on the lower door and fix
it in the intended position.
•
(12) Turn the middle door hinge
about180°, transfer it to the opposite
device side and fasten the hinge.
•
Put on the upper appliance door and
fix it in the intended position
•
(13) Fasten the upper door hinge to
the opposite device side, (14) after
you have moved the blind plugs.
•
(15) Replace the hinge cover.
Check that the doors are aligned
vertically and horizontally to ensure
proper opening and closing of the doors.
Startup / Operation
Startup / Operation
Startup / Operation
Startup / Operation
Prior to first use
Prior to first use
Prior to first use
Prior to first use
CAUTION:
CAUTION:
CAUTION:
CAUTION:
After transport, the appliance should be
left standing upright for 24 hours before
connecting to the power supply. Nonob-
servance could lead to malfunction of the
cooling system and causes an appliance
breakdown.
Clean the appliance interior including all
accessory parts. Consider the instruc-
tions which we provide in the chapter
“Cleaning and Maintenance”.
Starting the appliance
Starting the appliance
Starting the appliance
Starting the appliance
•
Connect the appliance to the power
supply.
•
Operate the control panel. See also
the section.
Summary of Contents for KG 7303
Page 35: ...35...
