webmaster@bomaxengineering.com
/ BM1046H Ride-on Trowel Owner’s Manual Ver.01-2016
Page 11
4. Water spray pump
Water spray switch locate on left joystick, red bottom is the switch
Spray locate on the guard ring
5. Hydraulic cooling fan
When machine starting, cooling fan can automatic running when hydraulic
oil temperature over 50
°
C, when stop the engine, cooling fan be stopped
Cleanup
NEVER allow concrete to harden on the power trowel.
Immediately after use, wash any concrete off your trowel with water. Be careful
not to spray water on the engine. An old paintbrush or broom may help loosen
any concrete that has started to burden.
Coat the blades and blade arms with diesel fuel after cleaning. This should
help prevent rusting and allow for easier cleanup in the future.
Maintenance (service, Adjustment and repair)
NOTE:
See the engine manual supplied with your machine for
appropriate engine maintenance schedule.
