EN/ 2-ASSEMBLY OF THE BABY HIGH CHAIR
–
1
CAUTION:
When following the instructions below,
make sure that your child or other children are in a
safe distance. Pay attention to the fact that
movable parts of the chair do not come to contact
with the child.
Press the button a) on the left or right leg and
unfold the frame. When it is fully unfolded, the
safety clip clicks and release the button. Repeat
this procedure also for the second leg. Put the legs
of the baby high chair to the seat, make sure that
the button is placed on the outer part during
unfolding of the frame. Put the legs through the
height positioning part. In order to set the height of
the sea, just press the button placed on the back
height positioning part and move the seat on the
frame. Baby high chair has 6 height positions.
Put the front stem on the front legs of the frame, the
stem has 2 flexible pins. Press the spring plugs placed
on each part of the stem and insert it to the end part of
the front frame. Press the stem into the frame until the
spring stoppers go through the holes in the frame of
the chair. Repeat this procedure also for the back
stem. Back legs are equipped with the integrated
wheels.
2-ASSEMBLY OF THE BABY HIGH CHAIR
–
2
CAUTION
: Place the chair solely in the horizontal
position and on a stable place. Never place it close to
the stairs.
2-ASSEMBLY OF THE BABY HIGH CHAIR
–
FOOTREST 3 / FOR THE OLD MODEL
Put the footrest to the respective hole and follow the drawings indicated below in order to fix the
footrest via the plastic screw and seal. After assembling the footrest, put on the plastic screw into the
hole and secure it with the seal.
