Bomma Pebbles, Installation Manual

Maintenance

•  When unpacking, installing and cleaning 

your fixture, handle the individual 

components with outmost care, 

particularly the glass parts, which are 

very fragile.

•  Assembly and electric installation must 

be carried out by certified electricians.

•  Floor lights are intended for interiors.

•  Do not cover nor touch the light source 

while the light is on.

•  Do not attempt any repairs or changes 

to the components. Always contact our 

specialized service.

•  Spare parts that are not supplied or 

approved by the producer may not be 

used.

•  The light source is tailor-made, so it 

is not possible to buy an adequate 

replacement freely. If a service change 

is required, please contact us at info@

bomma.cz. If the light source is destroyed 

due to incorrect electrical installation, it is 

not possible to claim warranty for service 

replacement.

•  Do not expose the light fixture to 

unsuitable environments where it could 

become damaged (water, frost, heat).

•  Ensure appropriate access (ladder, 

scaffolding, aerial work platform) prior 

to maintenance or cleaning floor lights, 

in order to comfortably reach and safely 

handle the light fixture.

•  Note:

 in some areas, the lighting fixture 

may have sharp edges that may cause 

injury. Beware while in immediate 

proximity of the fixture.

•  Perform cleaning and all maintenance 

with the light turned off, ideally entirely 

disconnected. Respect this rule for the 

entire duration of installation.

•  The installation of the floor light requires 

one person.

•  After installation check whether the light 

fixture is properly set in its base.

•  Do not expose the light to inappropriate 

strain and protect it from mechanical 

damage.

•  When in operation, the light source 

becomes hot. Prior to any handling, wait 

for the light source to naturally cool down 

and do not expose it to fast cooling.

•  Do not hang any other components on 

the light fixture, other than those listed in 

the installation manual.

•  Pay attention to checking all parts prior to 

their installation. Damaged components 

and glass parts (fragmentation, cracks) 

may cause personal injuries to persons 

moving within its proximity.

•  Should any serious problem occur during 

cleaning or maintenance, do not hesitate 

to contact the producer.

•  Any other handling of the floor light 

fixture should be performed by a 

qualified technician or directly by the 

producer.