Bomma Pebbles, Installation Manual

Cleaning

•  All cleaning and maintenance must be 

carried out when the power is off, ideally 

entirely disconnected.

•  When cleaning, use fine-fabric gloves. 

Particularly avoid handling metal-

coated crystal without gloves to avoid 

fingerprints and loss of gloss.

•  Use soft cloths to clean metal parts. Such 

parts may be cleaned with a dry cloth or 

a cloth dampened in warm water with a 

mild detergent. Avoid the use of solvents 

or technical benzene to clean metal 

parts. Avoid alcohol-based cleaners that 

may cause changes of surface colors.

•  Clean fine-steel surfaces with products 

sold especially for this purpose.

•  To clean the glass parts, use products in 

concentrations recommended by their 

producers. Immediately after cleaning, 

dry the light fixture and hang it again.

•  When cleaning glass parts, a concentrate 

of 90% water and 10% vinegar may also 

be used. Fill up a clean spray-bottle with 

this mixture. Use cotton gloves, apply the 

solution to one of them and gently wipe 

the parts requiring cleaning. Immediately 

dry the cleaned surfaces with the other 

glove. Give particular care to cleaning 

individual parts of the light that cannot 

be dismantled. Inappropriate handling 

may cause loosening or chipping of 

these parts.

•  Avoid cleaning removable parts of the 

light fixture in a dishwasher.

Important notice

•  The producer bears no responsibility 

for damage caused by unprofessional 

installation or inappropriate handling 

of the light fixture, including installation 

with accessories other than those 

recommended by the producer.

•  The producer bears no responsibility 

for damage caused by unprofessional 

interventions into the mounting and 

safety features of the light fixture, 

including damage to the product by 

inappropriate power supply, storage 

or use of the light fixture in a humid 

environment.

•  Do not place the light fixture in humid 

environments, such as near a boiler or 

other sources of water vapor. Do not 

place the lighting fixtures in shower 

eclosures or above bathtubs and never 

touch them when you are in contact with 

water.

•  The producer reserves the right to make 

minor changes to the construction of the 

light fixture without prior notice.