Bona Capricorn Manual
12
Commencing Operation (Cont.)
Instruction on removing sawdust generated during use
For minimized dust environment use a vacuum cleaner intended
for wooden dust.
Sawdust can ignite spontaneously and cause injury or damage.
It must be disposed of appropriately. Always empty the sawdust
into metal containers which are located outside the building.
Sawdust can ignite spontaneously and cause injury or damage.
Empty the contents of the dust bag when it is 1/3 full. Empty
the dust bag at the end of each machine use. Never leave the
dust bag unattended when it contains sawdust. Do not empty
the contents of the dust bag above a fire.
Prevention Measures for Users
Personal safety measures
Sawdust can spread through the air and be inhaled when using
the sanding machine. Always wear a dust mask of at least class
P2, when using the sanding equipment.
The eyes and/or body may suffer injury if personal safety
clothing is not used. It is adviceble to wear safety goggles,
protective clothing during sanding operations.
Lengthy exposure to noise levels during sanding operations
may damage the hearing. Always use EN-ISO approved ear
protectors (earmuffs) during sanding operations.
Using the machine when not fully assembled may cause
injury or damage to people or objects. DO NOT use the
machine when it is not fully assembled. Keep all fittings tightly
closed. Maintain machine settings in accordance with the
specifications.
Failure to comply with instructions on this machine and in this
manual may cause serious injury and/or damage. Read and
comply with all safety instructions. Ensure that all plates, labels,
warnings and instructions are secured to the machine. New
plates can be obtained from an authorized Bona dealer.
Injury or damage may occur if maintenance operations or
repairs are carried out by any unauthorized personnel.
Compliance with safety measures and warnings
