Bona Edge UX
10
Commencing Operation (Cont.)
Personal safety measures
Compliance with safety measures and warnings
Using the machine when not fully assembled may cause injury or
damage to people or objects. DO NOT use the machine when
it is not fully assembled. Keep all fittings tightly closed. Maintain
machine settings in accordance with the specifications.
Failure to comply with instructions on this machine and in this
manual may cause serious injury and/or damage. Read and
comply with all safety instructions. Ensure that all plates, labels,
warnings and instructions are secured to the machine. New plates
can be obtained from an authorized Bona dealer.
Sawdust can spread through the air and be inhaled when
using the sanding machine. Always wear a dust mask of at
least class P2, when using the sanding equipment.
The eyes and/or body may suffer injury if personal safety
clothing is not used. It is advisable to wear safety goggles,
protective clothing during sanding operations.
Lengthy exposure to noise levels during sanding operations
may damage the hearing. Always use approved EN-ISO ear
protectors (earmuffs) during sanding operations.
Injury or damage may occur if maintenance operations or
repairs are carried out by any unauthorized personnel.
Instructions on removing sawdust generated during use
Sawdust can ignite spontaneously and cause injury or damage.
It must be disposed of appropriately. Always empty the sawdust
into metal containers which are located outside the building.
Sawdust can ignite spontaneously and cause injury or damage.
Empty the contents of the dust bag when it is 1/3 full. Empty the
dust bag at the end of each machine use. Never leave the dust
bag unattended when it contains sawdust. Do not empty the
contents of the dust bag above a fire.
For minimized dust environment use a vacuum cleaner
intended for wooden dust.
Prevention Measures for Users
