Multi-Appliance Slimline Control
Bonaire Control Systems
Page 13
Ducted Gas Central Heating
F
AN
M
ODE
In Fan mode, the fan in the heater can be used to circulate the room
air without running the heating.
NOTE:
Fan speed is only available if digital communication loom is
installed. Please see your Authorised Bonaire Installer.
To operate the Fan Mode:
STEP 1
Turn the Slimline Controller ON by pressing the
ON/OFF
button.
STEP 2
Press the
MODE
button until ‘
FAN
’’ appears on the
display and the Fan LED will turn on.
(Note the room air fan is only circulating room air,
there will be no fresh air content.)
STEP 3
Press the
UP/DOWN
buttons to increase or
decrease the level of the fan speed 1 (low) to 12
(high).
A
UTO
C
OOL
M
ODE
(H
EATER
+
E
VAPORATIVE
C
OOLER
)
Auto Cool Mode can be operated if the Evaporative Cooler is
connected in conjunction with a central heater.
To operate the Auto Cool Mode,
STEP 1
Turn the Slimline Controller ON by
pressing the
ON /
OFF
button.
STEP 2
Press the
MODE
button until ‘
AUTO
’ appears on the
display and the Cool LED turns on.
STEP 3
Press the
Up/Down
button to adjust the comfort
level.
M
ANUAL
C
OOL
M
ODE
(H
EATER
+
E
VAPORATIVE
C
OOLER
)
Manual Cool Mode can be operated if the Evaporative Cooler is
connected in conjunction with a central heater.
To operate Manual Cool Mode,
STEP 1
Turn the Slimline Controller ON by pressing the
ON /
OFF
button.
STEP 2
Press the
MODE
button until ‘
MAN’
’ appears on the
display and the Cool LED turns on.
STEP 3
Press the
Up/Down
button to adjust the fan speed.
