Multi-Appliance Slimline Control
Bonaire Control Systems
Page 18
Ducted Evaporative Air Conditioning
OPERATING THE SLIMLINE CONTROLLER
To operate your Slimline Controller, simply press the ON/OFF button. The unit will then display the default
or last used settings and will be ready to operate. Any changes made to the Slimline Controller settings will
have a 3 second delay before the unit responds.
If the Evaporative cooler is connected in conjunction with a central heater you may have to toggle through
the modes to select the Evaporative cooling functions.
A
UTO
C
OOL
M
ODE
To operate Auto Cool Mode,
STEP 1
Turn the Slimline Controller ON by
pressing the
ON /
OFF
button.
STEP 2
Press the
MODE
button until the ‘
AUTO
’ icon
appears on the display and the Cool LED turns on.
STEP 3
Press the
Up/Down
button to increase or decrease
the comfort level 1 (Cooler) to 12 (Warmer).
M
ANUAL
C
OOL
M
ODE
To operate Manual Cool Mode,
STEP 1
Turn the Slimline Controller ON by pressing the
ON /
OFF
button.
STEP 2
Press the
MODE
button until the ‘
MAN
’’ icon
appears on the display and the Cool LED turns on.
STEP 3
Press the
Up/Down
button to increase or decrease
the fan speed 1 (low) to 12 (high).
F
AN
M
ODE
Fan Mode only delivers fresh air (with the pump not operating). To
operate Fan Mode,
STEP 1
Turn the Slimline Controller ON by pressing the
ON /
OFF
button.
STEP 2
Press the
MODE
button until the ‘
FAN
’’ icon appears
on the display and the Fan LED turns ON.
STEP 3
Press the
UP/DOWN
button to increase or decrease
the fan speed.
