OPERATION
POUR Mode:
1. Place dripper and carafe or cup on scale. The timer on the left of the display will
show 0’00” and the weight on the right side of the display will automatically tare
to 0.00.
Note: This mode automatically tares the first item set on the scale; it is necessary to
manually tare subsequent items placed on scale as indicated below.
2. Add coffee grounds.
3. Tare the scale by pressing TARE once. The display will show 0.00.
4. Add water. The timer will automatically start when the scale senses the weight
beginning to change. Since the display shows the weight and time, this will allow
you to customize how you brew your coffee.
REG Mode:
1. Place item on scale; the weight of the item is shown on the right side of the
display.
2. Press TARE as needed for each item added to the scale.
3. Start the timer by pressing the TIMER button. The display will flash once, and
then the timer will begin. The time is shown on the left side of the display.
4. To pause the timer, press the TIMER button once.
5. To reset the timer to 0’00”, press the TIMER button twice.
NOTE: The timer will reset to 0’00” once it reaches 9’59”.
TARE FUNCTION
Press TARE to cancel out or “zero” the weight on the scale.
