background image

hand, be- ing careful not to press 
hard on the platform. Then tap it 
against your other hand to allow 
the water to drip out of the scale.

4. Dry the exterior of the scale with a

soft cloth or leave to dry on a dish
rack.

Additional safeguards:

DO NOT use liquid bleach or
other harsh chemicals.

DO NOT use steel wool or
abrasive sponges as this can
scratch the surface.

DO NOT submerge the scale.

Avoid pouring water directly into
your scale, as water may become
trapped. If this occurs drying time
may exceed 4 hours.

Water drops on the LCD display
will not interfere with your
weighing. These drops will dry
and disappear.

If the scale displays “UNST” or
the readings jump after washing,
then water is still inside the scale.
Simply shake out the excess
water and let your scale dry
longer. Batteries should not come
in contact with water. The battery

compartment has a silicone seal 
to prevent this. In the event you 
wash the scale with the battery 
compartment open, please dry 
out the battery compartment 
with a soft cloth and make sure 
the batteries are dry before re-
installing the batteries.

If you open the compartment and
lose the silicone seal you may
replace the seal with an included
spare seal. The silicone seals are
black in color. Two (2) spare seals
are included.

By following these washing 
instructions, you will experience 
shorter drying times and your scale 
will provide you with years of reliable 
service.

Summary of Contents for BV2100SC










Reviews: