OPERATION
1. Remove all the packaging and take out all components from package carefully.
2.
Use the following steps to use the Bonavita scale
Put the Bonavita scale on level surface and breeze free area.
Pug the transformer connector into the bottom of the scale as shown.
Plug the scale transformer connect to the scale, then Plug the transformer to 120V or 220V AC outlet.
Press the power button, then the LCD light on and display as the weight and time.
Press the mode button to select your prefer unit of the weight, the scale has three modes for the
weight Oz, LB and gram.
Put a container on the scale surface, than press the zero button to reset the weight to zero.
Add the goods to the container until you get to your desired weight. The weight will be display on
the left of the LCD. Please do not weigh goods over the max measure 3 kg.
Note: You can put solid goods directly on the glass surface to weigh.
3.
Using the Bonavita Scale for Pour Over Coffee Brewing.
Put the scale on a level surface and breeze free area.
Plug the transformer connector into the bottom of the scale as shown.
Plug the transformer to AC 120 or 220V outlet, press the power button to turn on the scale.
Press the mode button to select your desired unit of weight
Insert the correct size paper filter in the pour-over cone filter, than put the filter on the scale. Bonavita
recommends Melitta paper filters.
Press the Z/T button to reset the weight to zero then scoop in your favorite ground coffee in the
filter until get your desired weight. The weight will be displayed on the left of the LCD.
Place the drip pan and drip cover on the scale.
Place a dripper stand with cup and filter on the dripper tray.
Press the Z/T button to reset the weight to zero.
Pour hot water through the filter carefully and the weight will be displayed on the left of the LCD.
Press the timer button on the scale to start count up timer and display on the right of the LCD
display, press the timer button one more time to stop. Press the timer again will reset. The max time
is 9 Min. 59 seconds.
4.
Clean the scale and drip pan
The drip cover, and drip pan are dishwasher safe. Please load in the upper rack of the dishwasher.
Use the soft cloth to clean the scale surface.
5.
Use the scale with batteries or transformer
The scale can use either the transformer to supplier power or use 3 AAA batteries.
Don’t use the scale with the transformer and batteries together.
When the LCD display “LO” it means you need to change the batteries. Replace the batteries to the scale.
Don’t mix different brands or styles of batteries in the scale.
Change the batteries together at the same time.
Make sure the batteries are inserted with the correct polarity.
If not in use for a long time or when in storage please remove batteries from scale.
Only use supplied transformer.
Don’t use the transformer in other products
Disconnect the transformer when cleaning.
Don’t use wet cloth to clean the transformer.
L O
Change the batteries:
Printed in China
1.5V
1.5V
1.5V
