Step 5:
Use 1pc M5x12 s
c
rew (M) to fasten the tank
housing supporter.
Step 6:
Screw off 3pcs M4x10 screws(L) from the burner
cover and attach the glass tube ring(D) into it.
Step 7:
Screw off all M5x12 screws(K)
from the upper supporter(F) first and then put through the
burner cover to the bottom and use screws to fasten them.
Caution:
Keep the hook
upwards.
Step 8:
Put the glass tube(C) into the glass tube ring.
4-4
4-5
5-1
5-2
Step 9:
Put the upper combination(G) into the supporter
and glass tube to make sure the three holes match
up
and use screws (from Step 7) to fasten them.
Step 10:
Assemble three mesh guards(E) into the upper
supporter hook.
Caution:
Ensure t
he mesh guard
is in the correct
position.
(10-3)
Step 11:
Assemble the anchoring arm(U) with M6x12
screws(S) and M6 nuts(T) into the base and use the
anchoring nut(V) to fasten the product into the ground.
Installation process is completed.
8
6-1
6-2
6-3
7-1
7-2
7-4
7-3
8-1
8-2
9-1
9-2
9-3
9-4
10-1
10-2
10-3
11-1
11-2
11-3
Summary of Contents for HYPH4601-4
Page 1: ...HYPH4601 4 READ BEFORE USE Model No Item No 67775...
Page 4: ...24 in 60 9 cm and sides 24 in 60 9 cm 24 in 60 9cm 24 in 60 9cm 4...
Page 10: ......
Page 11: ......
