BOND MANUFACTURING HYPH4601-4, Owner'S Manual

C

onnect 

H

ose 

&

 Regulator to 

C

ylinder

20LB Propane Cylinder 

307.9 mm

S

tep 

1

 - Gas 

C

ylinder Required

You

 must provide propane gas and propane cylinder.

Use a standard 20lb propane cylinder only.

Use this heater only with a propane vapor withdrawal
supply system. See chapter 5 of the Standard for 

Storage 

and Handling of Liquefied Petroleum Gas, ANSI/ NFPA 58. 
Your local library or fire department will have this book.
Maximum supply pressure of 250 psi. A mini

m

um supply 

pressure of 

25 psi

 is required for the purpose of input 

adjustment for propane gas.
The pre

s

sure regulator and hose assembly supplied with 

the appliance must be used

. Replacement pressure regu

-

lators and hose assemblies must be those specified by the 
appliance manufacturer.

A dented, rusted or damaged propane cylinder may be 
hazardous and should be checked by your cylinder sup

-

plier. Never use a propane cylinder with a damaged valve 
connection.
The propane cylinder must be constructed and marked in 
accordance with the specifications for LP gas cy

l

inders of 

the U.S. Department of Transportation(DOT) or the 
Standard for Cylinder

,

 Spheres & Tubes for 

transportation 

of Dangerous Goods & Commission, CAN/CSA-B339, as 
applicable.
Never connect an unregulated propane cylinder to the 
heater.

The cylinder must include a collar to protect the
cy

l

inder valve. 

Provided with a listed overfilling prevention device.
Provided with a cylinder connection device compatible with 
the connection for the appliance.
Do not store a 

sp

are LP-Gas cylinder under or near this 

appliance.

A cylinder must be stored outdoors in a well-ventilated 
area out of reach of children. A disconnected cylinder 
must have dust caps tightly installed and must not be 
stored in a building, garage or any other enclosed area.

Never fill the cylinder beyond 80 percent full.

Place the dust cap on the cylinder valve outlet whenever 
the cylinder is not in use.

Only install the type of dust cap 

on the cylinder valve that is provided with the cylinder 
valve.

 Other types of caps or plugs may result in leakage 

of propane.

■

■

■

■

■

■

■

■

■

■
■

9

Figure 1

■

■

■