3. Accessories:
List Details
Bone Conduction Headphone
1set
Transmitter
1set
Charge cable
1pcs
3.5mm Audio cable
1pcs
3.5mm to RCA adapter
1pcs
User manual
2pcs
4.
Charging Instruction:
When first used it, headphone and T10 both are supposed to charge
fully with a standard USB cable.
They will be fully charged around 3 hours.
To extend battery life, do NOT use it during charging
Turn them off after using in order to save power.
5.
Bluetooth pairing
First of all, turn on T10, the blue LED will slow flash and T10 starts
waiting for pairing.
Then turn on the headphone. Press and hold the multi-function (for 3
seconds) until the LED turns blue and flash slowly. During the very first 10
seconds, headphone will pair T10 automatically. If repairing doesn’t
succeed, headphone will enter the status of searching and wait for being
paired.
Press the repairing bottom on T10, the blue LED will flash quickly. T10
and headphone will be connected during 5 seconds.
Now wear the headphone (as the sample pic showing), the sound can be
received by user’s cheekbones
