5. Further information
5.1. Technical data
• Recording capacity: 25 hours.
• Bit rate during recording over built-in microphone: 64 kbps.
• Sampling rate: 32 kHz.
• Sample resolution: 16 bit.
• USB 2.0 Hi-Speed connection.
• Headphone jack: 3.5 mm.
• Line-in jack: 3.5 mm.
• Body made of impact-resistant plastic.
• Measurements: 85 x 54 x 14 mm (3.35” x 2.13” x 0.55”).
• Weight: 49 grams (1.7 ounces).
• Built-in rechargeable lithium polymer battery.
• Maximum recording duration with one battery charge: 15 hours.
• Maximum charging: 3 hours.
5.2. Configuration possibilities
On the internal memory of Milestone 112 you find a file with name “CONFIG
MILESTONE.TXT”. This file can be used to modify the configuration of Milestone 112. The
text file can be opened and modified with a text editor on your computer. The setting
possibilities are as follows:
Activate power off sound:
Go to entry “enable_feature offsound”. Replace “0” by a value between 1 and 200. For
example, enter 30 and Milestone 112 will play a short signal 30 seconds before it powers
off. The value “0” disables the feature.
Activate optional folders:
Go to entry “folders”. Replace “no” by “yes” and 5 folder to store your records will be
enabled on the internal memory of Milestone 112.
Activate folder names:
Go to entry “folder_names”. Replace “no” by “yes” and labeling of folders with a recorded
name becomes possible. A folder is labeled with the following button combination: Push
and hold “Rec” and after a click in addition push and hold “Mode”. Keep holding both
buttons and start speaking the name after the sound sequence “low pitched-high pitched”.
You finish the record by releasing both buttons. This is signaled by the sound sequence
“high pitched-low pitched”.
Increase speed of prompts:
Go to entry „prompt_speed“. Replace “100” by a value up to 150. This feature enables you
to increase the announcement speed of menu prompts. For example, if you insert 150 the
speed level of the menu prompts will be at 150%.
Safe and close the file when you have done your modification.
5.3. Protecting your Milestone
Please protect Milestone 112 from mechanical overload, humidity and from contact with
water. All parts of the guarantee are voided by inappropriate use or opening of the device.
!
7
/8
