File Name:
Project:
Sub Project:
Revision:
MEITRACK MVT340 User Guide
MVT340
User Guide
V2.7
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Cavana Cheung
2010-08-26
2013-01-31
- 15 - of 18
External Documentation
Tracker ID
Read
Write
MVT340’s IMEI. It is the only ID in GPRS packet.
Read current tracker’s settings for above items.
Write above settings to the tracker.
Tick the box for receiving GPRS report.
Event Description:
Event
Description
(If the box is ticked, authorized phone number will get event report
by SMS or calling)
SOS/Input 1 Active
Input 2 Active
SOS/Input1 Inactive
Input 2 Inactive
Low Battery
Low External Power
Speeding
Enter Geo-fence
Exit Geo-fence
External Power On
External Power Off
No GPS Signal
Get GPS Signal
Enter Sleep
Exit Sleep
GPS Antenna Cut
Device Reboot
Heartbeat Report
Heading Change Report
Distance Interval Report
Tow Alarm
Report when input1 (SOS) is active/pressed.
Report when input 2 is active.
Report when input 1 inactive (SOS released).
Report when input 2 inactive.
Report when backup battery’s voltage is below 3.5V.
External power (car battery) is lower than predefined voltage.
You can define voltage in Main Settings.
Report when MVT340 speeds higher than the pre-set value.
Value can be changed on tap III
Main Settings
Report when MVT340 enters Geo-fence.
Report when MVT340 exits Geo-fence.
Geo-fence can be changed on tap III
Main Settings.
Alarm when external power supply is on or recover.
Alarm when external power supply if off or cut.
Report when MVT340 enters GPS blind area or no GPS signal.
Report when MVT340 exits GPS blind area or get GPS signal.
Report when MVT340 enters sleep mode.
Report when MVT340 exits sleep mode.
Sleep mode can be changed on tap III
Main Settings.
Alarm when the GPS antenna is disconnected or cut
Report when MVT340 is rebooting.
Turn on heartbeat report
You can define heartbeat interval on tap III
Main Settings.
Auto report when tracker’s direction changes over predefined angle
You can define angle degree on tap III
Main Settings.
Track by distance.
Interval can be changed on tap III
Main Settings.
Alarm when the tracker trembles for a period of time.
You can define tow time on tap III
Main Settings.
For more information about GPRS settings, please refer to MEITRACK SMS/GPRS Protocol.
- 15 -
BONITEL EIRL F: 325 7401
– RPC 987583073 – RPM #970400 - NEXTEL 120*2607
