8
5.
Specifications
Input voltage
100 VAC (BON-8103) / 220 VAC (BON-8203)
Frequency
50 Hz
60 Hz
Feeding amount
37 mm/sec.
44 mm/sec.
Feeding method
Footswitch
Applicable solder diameter
DIA. 0.3 ~ DIA. 0.8 mm
Dimension
70W x 104D x 160H mm
Weight
1175 g (body + power cable + footswitch)
Power consumption
approx.. 6.5 W
Power cable
L= 1.90 m 3pin plug cable
L= 1.85 m BS1363 3pin plug cable
( a fuse is built-in)
Case material
Steel : t = 1.0
6.
Trouble shooting
How to set a solder wire
Refer to page 5.
How to adjust solder diameter
Refer to page 4.
How to adjust depth of V-groove
Refer to page 6.
V-blade or guide pulley is getting
dirty.
Refer to page 7.
Solder wire unable to feed.
1) Plug the power cable into the outlet firmly.
2) Check the solder wire diameter again and use
an appropriate solder wire.
V-blade or guide pulley is touching
with other parts.
Contact us for repair.
Footswitch or motor is out of order. Contact us for repair.
Solder balls are getting increased.
1) Check the depth of V-groove and adjust it
accordingly. Refer to page 6.
2) Check the solder wire diameter again and use
an appropriate solder wire.
Solder balls are still increasing after
adjustments.
It is expectable of deterioration of V-blade or
guide pulley. Contact us for repair.
